If your Bissell ProHeat 2X Revolution Pet Turbo isn’t spraying water or cleaning solution, it can hinder your cleaning routine. Fortunately, most issues are fixable with simple steps. This guide helps you identify common causes and fix your machine safely and effectively.
Follow these troubleshooting steps carefully to restore your cleaner’s spraying function and keep your carpets looking their best.
Key Takeaways
| Check water and solution levels | Ensure tanks are filled and properly seated. |
| Inspect spray nozzles | Clogged nozzles are a common cause of no spray. |
| Examine the spray hose | Look for blockages or leaks. |
| Test the pump and motor | Ensure they are functioning properly. |
| Clean recommended parts regularly | Prevents buildup and clogs. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
- Motor Technology: 40% more suction, quieter operation
- Max Clean Mode: Removes dirt, stains, allergens
- Express Clean Mode: Dries carpets in 30 minutes
As an affiliate, we earn on qualifying purchases.
Check Water and Solution Tanks
- Remove both the clean water and solution tanks from the cleaner.
- Confirm that each tank is filled with water and cleaning solution as needed.
- Ensure the tanks are correctly seated back into the machine, clicking into place securely.
Inspect the Spray Nozzles
- Locate the nozzles on the cleaning head or wand.
- Use a small brush or pin to clear any debris or clogs from the nozzle openings.
- Rinse the nozzles with warm water if necessary, then reattach.
Examine the Spray Hose
- Disconnect the spray hose from the machine following the user manual instructions.
- Check for kinks, blockages, or leaks along the hose.
- If clogged, flush the hose with warm water or replace if damaged.
Test the Pump and Motor
Turn on the cleaner and select the spray mode. Listen for the pump running — you should hear a slight humming sound. If not, the pump may be faulty or disconnected.
In this case, consult a repair technician or contact Bissell customer service for further diagnosis.
Perform Regular Maintenance
- Clean the spray nozzles and hose regularly to prevent clogs.
- Use only recommended cleaning solutions like Bissell Multi-Surface Solution to avoid damaging internal parts.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 18.6 pounds
- ✔ Power Cord: 25 feet
- ✔ Dimensions: 12 x 13 x 43 inches
JORAIR Brush Replacement Compatible
- ✔ Material: Synthetic fibers
- ✔ Weight: 1.2 pounds
- ✔ Color: White and gray
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers powerful suction, heatwave technology, and dual DirtLifter PowerBrushes, making it a top choice for deep cleaning. Its spray system can sometimes clog or malfunction, but troubleshooting is straightforward.
Pros:
- Powerful suction and cleaning modes
- Heatwave technology maintains water temperature
- Quiet operation with TurboStrength motor
- Suitable for pet stains and embedded dirt
Cons:
- Nozzle clogs can occur without maintenance
- Requires regular cleaning of nozzles and hoses
- Tank seals need checking for leaks
Best for: Deep cleaning pet hair, stains, and embedded dirt
Not ideal for: Users seeking a lightweight, less complex machine
Bottom line: A professional-grade carpet cleaner with advanced features for deep, pet-friendly cleaning.
JORAIR Brush Replacement Compatible
This compatible brush replacement and filter pack is ideal for maintaining your Bissell CrossWave. It ensures optimal spray and suction performance, especially if nozzles or hoses are clean but spray still fails.
Pros:
- Compatible with many Bissell CrossWave models
- Includes 3 brush rolls and filters
- Affordable and easy to install
- Improves cleaning efficiency
Cons:
- Only for CrossWave models listed
- Brushes may wear over time
- Filters require periodic replacement
Best for: Maintaining and restoring spray function
Not ideal for: Not compatible with the ProHeat carpet cleaners
Bottom line: A cost-effective way to keep your CrossWave performing like new.
Frequently Asked Questions
Why is my Bissell carpet cleaner not spraying water?
Common causes include clogged nozzles, blocked spray hose, or a faulty pump. Checking these components and cleaning them often solves the issue.
How do I clear a clogged spray nozzle?
Remove the nozzle and use a pin or small brush to clear debris. Rinse with warm water and reattach securely.
Can I use any cleaning solution with my Bissell cleaner?
It’s best to use solutions recommended by Bissell, such as their Multi-Surface Solution or 78H63 Deep Clean Pro, to avoid damage.
Is it safe to repair my Bissell myself?
Yes, for common issues like clogs or nozzle cleaning. For electrical or pump repairs, contact a professional or Bissell customer service.
Restore Your Bissell’s Spraying Power
With these troubleshooting steps, you can often fix your Bissell ProHeat 2X Revolution Pet Turbo and get back to deep cleaning your carpets. Regular maintenance and using compatible parts and solutions will prolong your machine’s lifespan and performance. If issues persist, professional repair might be necessary, but most problems are manageable at home.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
