TL;DR
Get cleaning gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A TikTok creator called One Handy Momma shared a DIY method for adding temporary bathroom workspace: rest a cut plywood board across an open vanity drawer, with L-brackets to help keep it in place. The idea is a low-cost, removable surface, but the report does not provide safety testing or confirm that it fits every vanity.
A DIY creator known as One Handy Momma has shared a way to add temporary space to a crowded bathroom counter: place a cut piece of plywood across an open vanity drawer, with L-brackets underneath to help hold it in position. Hunker reported on the tip, which gives users a surface for grooming items without requiring a permanent countertop alteration.
Hunker describes the method as a removable extension for a bathroom vanity. The board is cut to fit the width and depth of an upper drawer, or across several drawers for a wider surface. Two L-brackets are attached underneath, near the left and right edges, so they can rest over the drawer’s side walls and help keep the board aligned while it is in use.
The materials listed in the report are plywood, measuring tools, a saw, screws, two L-brackets and a drill or screwdriver. The creator’s video caption, quoted in Hunker, says: “This is my hack to give me extra countertop space when I need it!” The report suggests using the board for items such as a cosmetics bag or hair-styling tools, then removing it and closing the drawer when the added surface is no longer needed.
Hunker says the board can be stained, painted or decorated, or left unfinished because it is not intended to remain on display. It also suggests applying a water-resistant finish, such as penetrating oil or polyurethane, to limit damage from moisture. The source does not report testing the board’s load capacity, stability across different drawer designs, or long-term durability.
A Removable Surface for Tight Vanities
The tip addresses a practical problem in small or shared bathrooms: counters may be occupied by everyday necessities and decorative items, leaving little room to set down products while getting ready. A removable board could provide a temporary work area without replacing the vanity or permanently changing the counter.
Its usefulness depends on the individual setup. Drawer dimensions, construction and the board’s fit all affect whether the surface can sit securely. The method is not a substitute for a purpose-built countertop or storage fixture, and the source offers no independent test showing how much weight the board can safely support. Readers considering it should treat fit and stability as household-specific, rather than assuming the same plan will work in every bathroom.
removable bathroom vanity countertop extension
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
How the Drawer Extension Works
The reported approach uses the top of an open vanity drawer as support for a separate board. The creator’s method is temporary: open the drawer, place the board across its side walls, use the surface while needed, then remove it or store it elsewhere. Hunker says the board may sometimes allow the drawer to close while still in place, but that depends on the vanity and the board’s dimensions.
The report also mentions extending the idea with a separate board over the sink basin for more surface area. It warns that the surface should be completely dry before electrical devices are used there. That suggestion is distinct from the drawer-top setup and may not suit every sink or bathroom; the source gives no detailed instructions for securing a board over a basin.
“This is my hack to give me extra countertop space when I need it!”
— One Handy Momma, in a TikTok caption quoted by Hunker
small bathroom countertop storage solutions
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Fit and Load Limits Are Unreported
The source does not say when the TikTok video was posted, how many people have tried the method, or whether the creator tested it with different vanity designs. It provides no weight limit, stability assessment or safety testing for the board and brackets. It is also unclear whether a drawer can close with the board left in place; Hunker says this may be possible, depending on the setup.
Readers should not assume that a board spanning a drawer is secure simply because it appears to fit. The report does not specify plywood thickness, bracket dimensions, screw type or how to assess whether a drawer’s side walls can support the added load. It also does not provide a tested method for bridging a sink basin.
As an affiliate, we earn on qualifying purchases.
Measure Before Making the Board
Anyone considering the project would need to measure the intended drawer or drawers before cutting the plywood, then check that the board rests properly on the drawer walls and that the brackets do not obstruct its placement. The report offers no standard dimensions, so the design must be adapted to the specific vanity.
Before putting items on the extension, users should check that it does not rock or shift and keep it clear of water. Hunker recommends a water-resistant finish and says any surface used near electrical devices should be completely dry. Whether the idea works safely and conveniently in a given bathroom remains a matter of the vanity’s construction and the finished board’s fit.
As an affiliate, we earn on qualifying purchases.
Key Questions
What is the bathroom counter storage hack?
It is a removable plywood board placed across an open vanity drawer to create temporary workspace. Two L-brackets attached underneath are intended to help hold it over the drawer’s side walls.
What materials does the report list?
Hunker lists plywood, a measuring tape, a pencil or pen, a saw, two L-brackets and screws, and a drill or screwdriver.
Can the board stay in place when the drawer closes?
Possibly, according to Hunker, but it depends on the board and vanity. The report does not establish that this works for all drawer designs; the board can also be removed and stored when not in use.
How should the plywood be protected from moisture?
Hunker suggests considering a water-resistant finish, including penetrating oil or polyurethane. The report does not specify a product or provide testing for how well a particular finish protects the board.
Is the method tested for weight or stability?
The source gives no load rating or independent stability test. The board’s fit and the vanity’s construction will vary, so the report does not confirm that the method is suitable for every bathroom.
Source: rss
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
